Automatic koporo rod machining setsi sa GJCNC-CMC
Litšobotsi tse ka sehloohong tsa ts'ebetso
• Setsi sa machining sa khabinete se ka tlatsa sebaka sa koporo se nang le mahlakore a mararo Angle ea ho kobeha ka mokhoa o iketsang, CNC punching, flattening ka nako e le 'ngoe, ho kuta le lisebelisoa tse ling tsa theknoloji;
• Angle ea ho kobeha ea mochine e laoloa ka mokhoa o itekanetseng, tataiso ea bolelele ba molamu oa koporo e behiloe ka tsela e iketsang, tataiso ea selikalikoe sa molamu oa koporo e potoloha ka bo eona, ketso ea ts'ebetso e tsamaisoa ke servo motor, taelo ea tlhahiso e laoloa ke servo system, 'me sebaka se kobehang ka mahlakore a mangata sea phethahala.
• Mochine o hlokomela ts'ebetso ea ho iketsetsa maemo ha koporo ea koporo e batalatsoa, e khaoloa, e phunyeletsoa le ho chesoa, ka ts'ebetso e bonolo le ts'ebetso e phahameng ea machining, ho fokotsa bothata le phoso ea ho bala ka letsoho le taolo ea tataiso ea Angle.
• Ho sebelisa segokanyimmediamentsi sa sebolokigolo motho, bapisa workpiece ho taka, input amanang parameters, Angle, ho beha ya data ke e bonolo, ka potlako, phahameng ho nepahala.
• Mochini o amohela phepelo e thusang ka letsoho le molamu oa koporo ho hlokomela ts'ebetso e tsoelang pele ea othomathike.
• Mochine o na le sekoti se phahameng se nepahetseng sa bolo le seporo sa linear guide ho netefatsa ho nepahala ho phahameng le ho sebetsa hantle haholo.
• Mochine o na le sekoti se phahameng se nepahetseng sa bolo le seporo sa linear guide ho netefatsa ho nepahala ho phahameng le ho sebetsa hantle haholo.
• Likarolo tsa motlakase tsa mochine li entsoe ka lihlahisoa tse tsebahalang lapeng le linaheng tse ling, ka bophelo bo bolelele ba tšebeletso le boleng ba boleng.
• Etsa lithupa tsa koporo ka har'a ∅8 ho isa ho ∅25. Nako e le 'ngoe ea ho batalla bolelele: 50mm,
Mekhahlelo ea mantlha ea tekheniki
| Sehlooho | Yuniti | Lintlha | |
| Ho kobeha | Matla a Nomal | kN | 260 |
| Ho Koba Angle ho nepahala | Palo ea likhato | <±0.3 | |
| Phoso ea ho potoloha ha sebaka | Palo ea likhato | <±0.3 | |
| Leqeba la axial | mm | 1500 | |
| Ho nepahala ha bolelele ba ho fepa | mm | 0.2 | |
| Molamu oa koporo o lumelletsoeng | mm | Ф8～Ф25 | |
| Angle e nyane ea ho phethola | Palo ea likhato | 70° | |
| Phoso ea bolelele ba ho kobeha | mm | 0.5 | |
| Axial rotation Angle | Palo ea likhato | 360° (＜±0.2°) | |
| Ho nepahala ha maemo a phetoang | mm | ±0.1 | |
| Kakaretso ea matla a servo | kW | 2.3 | |
| Ho batalatsa, ho kuta, ho otla ka litebele, ho chesoa | Matla a Nomal | kN | 1000 |
| Molamu oa koporo o lumelletsoeng | mm | Ф8～Ф25 | |
| Boholo ba punch | mm | Ф32×26 | |
| Bolelele bo phahameng ba ho bata ka nako | mm | 50 | |
| Phoso ea ho sisinyeha | mm | 0.1 | |
| Phoso ea bolelele ba ho batalatsa | mm | 0.3 | |
| Bolelele ba boitsebiso bo setseng | mm | 150 | |
| Boima ba mochini | T | 3.36 | |
| Boholo ba mochini (bolelele * bophara * bophahamo) | mm | 3200*1500*2200 | |
| Kakaretso ea matla a phepelo | kW | 11.05 | |
Mekhahlelo ea mantlha ea tekheniki
| Tlhaloso | Yuniti | Paramethara | |
| Yuniti ea ho Kobeha | Matlafatsa | kN | 200 |
| Ho Nepaha ha Koba | 度 | <±0.3* | |
| Stroke ea mantlha ea Axial | mm | 1500 | |
| Boholo ba molamu | mm | 8-420 | |
| Min Bening Angle | Degree | 70 | |
| Angle ea ho potoloha | tekanyo | 360 | |
| Matla a Motlakase | kw | 1.5 | |
| Matla a Servo | kw | 2.25 | |
| Setsi sa ho Seha | Matlafatsa | kN | 300 |
| Matla a Motlakase | kW | 4 | |
| Boholo ba molamu | mm | 8-420 | |
| Yuniti ea Punch | Matlafatsa | kN | 300 |
| Boholo ba Punching | mm | 26x32 | |
| Matla a Motlakase | kw | 4 | |
| Setsi sa Phatlalatso se Sephara | Matlafatsa | kN | 600 |
| Bolelele ba Khatello e Phahameng |
| 4s | |
| Matla a Motlakase | kw | 4 | |
| Sehlopha sa Chamfer | Yuniti | kN | 300 |
| Matla a Motlakase | kw | 4 | |
